INFUSOMAT COMPACT PLUS P - INFUSION VOLUMETRIC PUMP
S-A-8717070
Description:
The infusomat compact plus P is an infusin volumetric pump from the compactplus series, which in combination with wide range of disposables and accessories, intemded for a variety of medical infusion therapies, patient populations, operator, environments and data exchange application.
1. Dimension
- 229 x 98 x 225 mm (W x H x D)
2. Weight
- 2.0 kg (including integrated compactplus handle and pole clamp)
3. Operator Interface:
- Color active matrix 2.4" TFT, 240 x 320 pixels, 262k colors, viewing angle: all
80°
- Visibility from all angles
- Color coded drug library.
- Intuitive user interface due to self-explanatory, guiding pictures menu
- Clear display of flow rate, flow volume, alarm status and battery status.
- Night mode with reduced display brightness is possible either by manual
adjustment or automatic according to time schedule
4. Language
- Default English or selection of other language.
5. Fluid Protection and Robust Design
- Protected against solid objects over 2.5 mm.
- Protected against solid objects over 2.5 mm.
6. Power supply
- Integrated power supply for use with standard power cords
- 100-240 V AC, 50-60 Hz, connection via power cable or Station compactplus
.
7. Disposable Type: Support pressure tested tubing up to 24hours of infusion
8. Internal battery (Internal battery)
- Battery life approx. 10 h at 25 ml/h
- Recharging time approx. 3 h
- Recharging time approx. 3 h
- Switchover from mains to battery operation without data loss or loss of input
9. Interface
- Cold connector for mains voltage.
- Accessory port for interface cable 12 V CP and staff call (VDE 0834)
- Accessory port for interface cable 12 V CP and staff call (VDE 0834)
10. Operating conditions
- Temperature : +5 °C … +40 °C
- Relative humidity : 30% … 90% (without condensation)
- Atmospheric pressure : 0.54 … 1.06 ba
11. Storage conditions
- Temperature : -20 °C … +55 °C
- Relative humidity : 20 % … 90% (without condensation)
- Atmospheric pressure : 0.5 … 1.06 bar
12. Product Classification
- According to EN 60601-1: : Protection class II/ For Type CF applied parts with defibrillation protection/For Type CF applied parts with defibrillation protection
Specification:
1. Flow rate range
- For Type CF applied parts with defibrillation protection
2. Flow parameters
- Calculation of the rate by selecting the time & volume./Rate change without flow interruption/ The up, down, right & left buttons can all be used to set the decimal places as
well as the units, tens, hundreds etc. numbers of different values
3. Dosage Calculation
- Automatic calculation of the flow rate on the basis of dosage units in mg, µg,
ng, IU, mmol or mEq / g time-based or optionally, weight-based/ Surface-related calculation
4. Bolus Rate :0.1 - 1000 ml/h
5. Volume preselection : 0.1 ml - 999.9 ml in increments of 0.1 ml
6. Time preselection : 0h 01min – 99h 59min.
7. Delivery accuracy : Delivery accuracy
8. Alarm Signal : Pre-alarms for volume nearly infused, bottle nearly empty, infusion time nearly
reached, battery nearly empty, KVO time nearly reached.
9.Dose Error Reduction Systems (DERS)
- Drug library,More than 3,000 drugs,Specific care units & 30 categories
10 KVO Rate:
- Rate: ≥ 10 ml/h: KVO rate 3 ml/h
- Rate: < 10 ml/h: KVO rate 1 ml/h
- Rate: < 1 ml/h: KVO rate = rate set using the service program (factory default rate 0.1
ml/h) or current rate if this is lower.
11. Warranty: 2 years from date of commissioning
12. MDA Registration : GC3205221-68472
Brand: B.BRAUN
Packing: 1 UNIT
